The anti-seepage membrane is a geological engineering ground waterproof material composed of a plastic film as a road waterproof board and a non-proof cloth. Its ground waterproof properties are basically the ground waterproof properties of the plastic film. for its unusual effect. Do you need to grasp this one thing? The following is a detailed description of the construction method of the anti-seepage membrane construction project:
1. Thermal welding process of impermeable membrane
The application of such methods requires high technological content and high construction technology requirements. It is very capable of using straight and long joints and polyurethane materials polyurethane elastomer floor waterproofing materials. The thermal welding process can also be used for arc laser welding, arc welding and electric welding of anti-seepage and anti-seepage membranes, anti-seepage membranes, high-density high-density high-pressure polyethylene anti-seepage membranes and high-density high-density high-pressure polyethylene anti-seepage membranes.
2. Adhesion method of impermeable film
- Adhesion method: Apply organic chemical adhesive on the overlapping surface, and then turn it with a plastic material wheel or grab it with a plastic material hammer and feet to make it stick to the table as a whole. The advantages of this product are: the construction of the construction project is simple, the construction cycle time of the construction project is reduced, the technical professional construction process is not required, and the construction of the anti-seepage membrane patchwork construction project can be carried out by itself
- The organic solvent bonding is reasonable: apply organic chemical organic solvent on the overlapping surface of the steel bar of the impermeable film, and the total bonding width is 5-10cm, resulting in a thin and uniform bonding comprehensive comprehensive service platform layer, using glue sticks Press hard until the bond is strong
3. The anti-seepage membrane steel bar lap joint method
After the 2 non-infiltrating film rolls are carried out, they overlap each other by 20-40 cm along the total width edge. This method is widely used in large, medium and small methods, which is simple and easy to implement and saves money management.
Post time: May-18-2022