China Factory for Hdpe/Plastic Dimple Drainage - Plastic Drainage Board – Beihai
China Factory for Hdpe/Plastic Dimple Drainage - Plastic Drainage Board – Beihai Detail:
Product Introduction:
Plastic drainage plate is made by polyethylene (HDPE) or polyvinyl chloride (PVC) as the raw material of plastic floor after punching into cone by units or stiffening rib protruding point (or hollow cylindrical porous)
Product Features:
1. Guide water, waterproof and drainage protection board have bump stud hollow structure, can fast effective export rainwater, greatly reduce or even eliminate the hydrostatic pressure of the waterproof layer, through the principle of the active water can be active waterproof effect.
2. Waterproof performance: polyethylene (HDPE) polystyrene (PVC) waterproof and drainage protection plate material itself is a kind of very good waterproof material. Through the adoption of reliable connection, make the waterproof and drainage board become a kind of very good auxiliary waterproof material.
3. Protect protective: waterproof and drainage plate can effectively protect structures and the waterproof layer, and to resist all kinds of acid and alkali in the soil and plant thorn. In the basement exterior wall backfill soil, it can protect the buildings and the waterproof layer from damage.
4. Sound insulation and ventilation moistureproof function: laboratory data showed that polyethylene (HDPE), polyvinyl chloride (PVC) waterproof and drainage protection plate can effectively reduce indoor 14 decibels, 500 hz noise, has obvious noise reduction of sound insulation function. Waterproof guide water board on the ground or metope to use, also can have very good ventilation moistureproof effect.
Product Specification:
| Plastic drainage board | ||
| item | Specification | |
| Tension at 10% elongation (N/100mm) ≥ | 350 | |
| Maximum pulling force (N/100mm) ≥ | 600 | |
| Elongation at break /% ≥ | 25 | |
| Tear performance/N ≥ | 100 | |
| Compression performance | Maximum strength when compression rate is 20%/KPa ≥ | 150 |
| Extreme compression performance | No break | |
| Low temperature flexibility | -10℃ no cracks | |
| Heat aging | Tensile retention at 10% elongation≥ | 80 |
| Maximum tensile retention rate/(N/100mm) /% ≥ | 90 | |
| Elongation at break retention rate /% ≥ | 70 | |
| Maximum strength retention rate when the compression rate is 20% ≥ | 90 | |
| Extreme compression performance | No break | |
| Low temperature flexibility | -10℃ no cracks | |
| Longitudinal water flow (test pressure 150KPa) (cm²/s) ≥ | 10 | |
Product Application:
1. Greening project: the garage roof greening, roof garden, vertical greening, roof greening, football pitches, golf course.
2. Construction: building based on the upper or lower, inside and outside the basement wall, floor and roof, roof seepage control and heat insulation layer, etc.
Video
Product detail pictures:
Related Product Guide:
High-quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is constantly observed and pursued by our business for China Factory for Hdpe/Plastic Dimple Drainage - Plastic Drainage Board – Beihai , The product will supply to all over the world, such as: Rio de Janeiro, Malaysia, Mexico, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.
By Jill from Colombia - 2017.12.31 14:53
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Raymond from Greece - 2017.09.29 11:19
