Factory wholesale Geocell For Road - Non-woven Geotextiles For Isolate Construction Materials – Beihai
Factory wholesale Geocell For Road - Non-woven Geotextiles For Isolate Construction Materials – Beihai Detail:
Product Introduction:
Non-woven Geotextiles (also known as permeable geotextiles, filter geotextiles, non-woven geotextiles), and divided into short fiber needled geotextiles and polyester filament geotextiles, gram weight in 100g-1200g, geotextiles is a nonwoven and industrial cloth. The permeable geosynthetics are made by the process of non-woven production equipment, such as loosening, carding, cluttering (short fibers interwoven together), netting (normalized entangling and fixation), and needling.
Product Features:
1. Non-woven Geotextile is used to isolate construction materials with different physical properties (particle size, distribution, consistency and density, etc.), such as soil and sand, sand and gravel, soil and concrete, etc
2. Filtration when water from the fine soil into the coarse soil, the use of geotextile good air permeability and water permeability, so that water through
3. Drainage It can form a drainage channel in the soil structure, the soil structure of the excess liquid and gas out
4. Reinforcement using geotextile to enhance the tensile strength and anti-deformation ability of soil, enhance the stability of building structure, to improve the quality of soil
Product Specification:
There are two kinds of Non-woven Geotextile:
1.PET Long Filament Geotextile
| PET Long Filament Geotextile Performance Parameter | ||||||||||
| Item | Technical specifications | |||||||||
| Breaking strength KN/m | 4.5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | |
| 1 | Longitudinal and transverse breaking strength KN/m≧ | 4.5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 |
| 2 | Longitudinal and transverse standard strength corresponds to elongation % | 40-80 | ||||||||
| 3 | CBR Bursting strength /KN≧ | 0.8 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 |
| 4 | Longitudinal and transverse tearing strength/KN≧ | 0.14 | 0.21 | 0.28 | 0.42 | 0.56 | 0.70 | 0.82 | 1.1 | 1.25 |
| 5 | Effective aperture O90(O95)/mm | 0.05-0.20 | ||||||||
| 6 | Vertical permeability coefficient cm/s | Kx(10-1~10-3),K=1.0-9.9 | ||||||||
| 7 | Thickness mm≧ | 0.8 | 1.2 | 1.6 | 2.2 | 2.8 | 3.4 | 4.2 | 5.5 | 6.8 |
| 8 | Width deviation % | ±0.5 | ||||||||
| 9 | Mass deviation per unit area % | ±5 | ||||||||
| Specifications fracture strength, the actual specifications between the adjacent specifications in the table, according to the linear interpolation method to calculate the corresponding assessment indicators, beyond the scope of the table, the assessment indicators are determined by mutual agreement between supply and demand | ||||||||||
| When the actual breaking strength is lower than the standard strength, the elongation corresponding to the standard strength is not judged as conformity | ||||||||||
| Standard values by design or negotiation | ||||||||||
2.PP/PET Short Fiber Geotextile:
| PP/PET Short Fiber Geotextile Performance Parameter | ||||||||||
| Item | Technical specifications | |||||||||
| Breaking strength KN/m | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 40 | |
| 1 | Longitudinal and transverse breaking strength KN/m≧ | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 40 |
| 2 | Longitudinal and transverse standard strength corresponds to elongation % | 20-100 | ||||||||
| 3 | CBR Bursting strength /KN≧ | 0.6 | 1.0 | 1.4 | 1.8 | 2.5 | 3.2 | 4.0 | 5.5 | 7.0 |
| 4 | Longitudinal and transverse tearing strength/KN≧ | 0.1 | 0.15 | 0.20 | 0.25 | 0.40 | 0.50 | 0.65 | 0.80 | 1.0 |
| 5 | Effective aperture O90(O95)/mm | 0.07-0.20 | ||||||||
| 6 | Vertical permeability coefficient cm/s | Kx(10-1~10-3),K=1.0-9.9 | ||||||||
| 7 | Thickness deviation rate % | ±10 | ||||||||
| 8 | Width deviation % | ±0.5 | ||||||||
| 9 | Mass deviation per unit area % | ±5 | ||||||||
| 10 | Acid and alkaline resistance (Power retention rate) %≧ | 80 | ||||||||
| 11 | Anti-oxidation performance (Power retention rate) %≧ | 80 | ||||||||
| 12 | UV resistant performance (Power retention rate) %≧ | 80 | ||||||||
Prodct Application:
Widely used in water conservancy, electric power, mines, roads and railways and other geotechnical engineering:
1.Filter material for soil separation;
2.Reservoir, mine beneficiation drainage materials, high-rise building foundation drainage materials;
3.River embankment, slope erosion materials;
4.Reinforcing materials for roadbed of railway, highway and airport runway, and reinforcing materials for road construction in swamp area;
5.Frost and frost insulation materials;
6.Asphalt road surface crack resistance material.
Workgroup
Video
Product detail pictures:
Related Product Guide:
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Factory wholesale Geocell For Road - Non-woven Geotextiles For Isolate Construction Materials – Beihai , The product will supply to all over the world, such as: Guinea, Juventus, Seychelles, Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
By Mario from South Africa - 2017.01.11 17:15
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Christina from kazan - 2017.03.28 12:22
